Maintenance and Maintenance of Automatic Sleeve Labeling Machine

  Daily maintenance of equipment

  1.The working environment temperature of the sleeve labeling machine is required to be normal temperature, and it is not easy to use it in high temperature, humidity, acid and alkali environments regularly, so as not to affect the service life, efficiency and accuracy of the equipment.

  2.After the machine is working every day, first disconnect the power supply, wipe the surface of the machine, workbench and other parts; regularly check the tightness of all bolt connections, if loose, tighten it in time, check the chain and other moving parts, if there is a fault, remove it in time , And regularly add lubricating oil, add drops of engine oil or butter to lubricate each gear meshing surface regularly.

  3.After the equipment has been running continuously for 10 hours, it needs to be shut down for half an hour to do the daily maintenance of the above equipment, especially non-standard equipment; in order to reduce equipment loss and extend equipment life; during holidays or when the equipment is not in use, it is necessary to clean the equipment, remove oil pollution, and perform Lubrication and maintenance; the producer should reasonably arrange production tasks according to the equipment's performance, technical conditions, processing range, load capacity, etc.

  4.Clean up the mechanism of the equipment, such as friction roller, electrical box, etc., you can use alcohol or commercial neutral cleaning fluid to clean and maintain, replace the scrapped or worn wearing parts, because of your correct maintenance, careful maintenance can make the equipment Always maintain the best production state.