Milk Powder Can Sleeve Label Applicator

  There are three sleeve marking methods for milk powder cans, one covering only the mouth of the can, one covering the body of the can, and the other covering the mouth, body, and bottom of the can.

  The sleeve label of milk powder cans can play a very good protective role to avoid friction and damage to the can body during transportation, and can also play a sealing role.

  The first two can be easily realized, while the latter requires adding a mechanical component that covers the bottom sleeve to achieve the effect.

  The milk powder can sleeve label applicator uses an electric shrink tunnel, which can keep it dry and moisture-free and maintain the quality of the product.

  When designing a milk can sealing sleeve label applicator, it is necessary to design a suitable center column according to the diameter of the product. Because the can body is larger, the cutter set also needs to be enlarged, from four knives to six knives.

  Generally, the diameter of the shrink tunnel of a sleeve label applicator is around 110, so the milk powder tank needs to enlarge the design of the tunnel opening.

  The shrink tunnel can affect the shrinkage effect and evenly heat the product according to the sleeve labeling position to achieve the optimal shrinkage state.