Sleeve Label Applicator Maintenance- Sleevelabeler.com

  1. The sleeve label applicator maintenance needs to be connected to the corresponding power supply voltage before it can be turned on.

  2.Check the chain and related parts. If there is any debris, it should be cleaned in time. If the small problem is not dealt with in time, it will lead to more serious problems.

  3.Detect the operation of the sleeve label applicator maintenance, there should be no misalignment, and if necessary, adjust it from scratch.

  4.Don't work too hard.

   Periodic inspection of the machine should be carried out in order to protect the normal operation of the machine, including but not limited to the following aspects.

1. Use a soft brush or cloth to clean up the sensor lens.

2. Spray all stainless steel and iron parts with an anti-corrosion stain remover and gently wipe with a soft cloth.

3. During holidays or when the equipment is not in use, it is necessary to clean the equipment, remove oil stains, and perform smooth maintenance.

   
   

4.